MANNOL Wear Protection Additive Ceramo Ester

MANNOL Wear Protection Additive Ceramo Ester

Contents: 250ml (sufficient for 5l engine oil)

An innovative engine protection agent based on synthetic compound ethers and esters (Group V oils) and hexagonal boron nitride microparticles h-BN (white graphite) – an antiwear and antifriction additive for engine oils without a wet clutch (friction clutch). It is suitable for all engine types – diesel and gasoline, four- and two-stroke, and for all oil types – mineral, semi-synthetic, and synthetic, including those containing ethers (esters). It is ideal for tuning and high-performance cars.
It is a stable suspension of graphite-like micropowder in ether.
Due to their pronounced polarity, ether molecules in the additive are magnetically bonded to metal surfaces, forming a dense and highly stable oil film, while ceramic microparticles smooth out uneven friction surfaces and effectively dissipate heat. This prevents direct contact between metal surfaces and wear on individual components, even under the most extreme operating conditions. Dry friction during cold starts, especially at sub-zero temperatures, is prevented, thus minimizing wear during engine start-up.

The boundary layer that forms when the product is applied has the following properties:
- extreme pressure resistance – this allows the engine and/or gearbox to operate under increased load without negative consequences;
- excellent anti-wear and anti-friction properties, which significantly increases the service life of the engine or transmission unit and significantly reduces fuel consumption and engine noise;
- anti-corrosive and antioxidant properties.
The additive gives the oil the following properties:
- it prevents dry friction;
- it reduces evaporation, reduces CO2 emissions and extends oil life
- it improves thermal-oxidative stability, which increases resistance to aging and degradation, allowing oil change intervals to be extended;
- improves low-temperature properties, which significantly facilitates cold starts;
- improves detergent and dispersion properties, prevents deposits of varnishes, resins and sludge, which increases the service life of the engine and/or transmission and the oil itself.
Compatibility:
- Compatible with all materials, soot particle and finest oil filters (for fine filtration): the particle size (no more than 0.5 μm) guarantees their free passage through all filters and prevents deposits;
- Compatible with catalytic converters, all types of turbochargers and all injection systems including common rail.

Application: Shake and add to the oil in a ratio of 250 ml to 5 L.
Caution! Not suitable for use in devices with oil bath clutches (friction clutches).